English
3D Printers

Cetus 3D Printer MK3, UK Stock Reviews

4.42 Rating (55 Reviews)
3D Printers Cetus3D Printers CETUS MK3
399 USD Buy at Tiertime 3D Printer Store
Andrew F.
Verified Buyer
Loved the first two - so bought two more. Great support and a well run company!
2 out of 3 people found this review helpful
Posted 316 days ago
Nigel Owen
Verified Buyer
The printer does a good job and is easy to use but.. shortly after I started to use the printer it stopped communicating via the usb. I contacted Tiertime and received an acknowledgement but no assistance so I started to investigate. First I replaced the main board which I thought was the problem but this made no difference. I then replaced the CPU board but again this made no difference and I was very out of pocket. Having eliminated everything obvious, I investigated the microSD card which the printer uses to store data. I couldn’t read it in a card reader so I replaced it with a blank formatted card. This worked and the printer now connects. As I said, it’s a good printer but support is poor and mine had a very strange fault which cost me a lot of money to identify. I now have some expensive spares!
9 out of 9 people found this review helpful
Posted 330 days ago
EUGENU DRAGOESCU
Verified Buyer
I first saw this printer with a friend. She came to work with me to brag. I also have 3 printer models, of which Prusa, Delta and one SLA type. Although I had printed many models at that time, I was very impressed by the prints made by my friend with a Cetus 3D printer model MKII. This made me buy a standard MKIII printer. I am very satisfied with the quality of the printer. I also decided to buy the update packages for it, namely the digital screen and the heated bed together with the automatic leveling sensor. I warmly recommend the purchase! I will come back with new comments after I upgrade my printer.
7 out of 7 people found this review helpful
Posted 372 days ago
Anonymous
Verified Buyer
Very nice
1 out of 1 people found this review helpful
Posted 438 days ago
Cédric Clivaz
Verified Buyer
Assembly manual difficult to understand
2 out of 6 people found this review helpful
Posted 450 days ago
TAKENOBU M.
Verified Buyer
simple is best! It is worth modifying
5 out of 5 people found this review helpful
Posted 512 days ago
Nick seger
Verified Buyer
Works pretty well. A little loud, seeing as I keep it next to my bed at night, but not that big of a problem since I'm a heavy sleeper.
1 out of 2 people found this review helpful
Posted 518 days ago
Jose Caceres
Verified Buyer
High Quality parts, an improvement in the manual would be usefull
2 out of 3 people found this review helpful
Posted 523 days ago
Dominick Sansone
Verified Buyer
I am so glad I bought this printer, I bought it because I like like smaller printers, I have some cool ones, but the Cetus MK3 blows my mind, it’s prints better than most of my printers! Thanks Tiertime
1 out of 1 people found this review helpful
Posted 533 days ago
emily
Verified Buyer
By far the most accurate and repeatable printer for the price, if you make a lot of parts that require tight tolerances or figurines with ultra high detail, this printer is tuned and perfect. No futzing.
3 out of 3 people found this review helpful
Posted 538 days ago
Michael Wegener
Verified Buyer
This is a great piece of hardware. I use it for larger prints mainly in Reflow PETG in our SATWARE//LABS. It performs very well and keeps the temperatures at the same level throughout the print. Stringing does occur in very small amounts so I'm a very happy customer. The direct drive extruder handles large spools (4,5kg) exceptionally well. This kit came with everything needed for my daily needs, even 3 different nozzle sizes were included.
6 out of 6 people found this review helpful
4
Posted 543 days ago
William M.
Verified Buyer
The MK3 is a well made printer but...I will not use it until I replace the proprietary electronics. If you are using this printer and want to keep your privacy I would do the same. Don't trust China!!!
5 out of 32 people found this review helpful
Posted 547 days ago
Andrew F.
Verified Buyer
Loved the first two - so bought two more. Great support and a well run company!
2 out of 3 people found this review helpful
Posted 316 days ago
EUGENU DRAGOESCU
Verified Buyer
I first saw this printer with a friend. She came to work with me to brag. I also have 3 printer models, of which Prusa, Delta and one SLA type. Although I had printed many models at that time, I was very impressed by the prints made by my friend with a Cetus 3D printer model MKII. This made me buy a standard MKIII printer. I am very satisfied with the quality of the printer. I also decided to buy the update packages for it, namely the digital screen and the heated bed together with the automatic leveling sensor. I warmly recommend the purchase! I will come back with new comments after I upgrade my printer.
7 out of 7 people found this review helpful
Posted 372 days ago
Cédric Clivaz
Verified Buyer
Assembly manual difficult to understand
2 out of 6 people found this review helpful
Posted 450 days ago
Nick seger
Verified Buyer
Works pretty well. A little loud, seeing as I keep it next to my bed at night, but not that big of a problem since I'm a heavy sleeper.
1 out of 2 people found this review helpful
Posted 518 days ago
Dominick Sansone
Verified Buyer
I am so glad I bought this printer, I bought it because I like like smaller printers, I have some cool ones, but the Cetus MK3 blows my mind, it’s prints better than most of my printers! Thanks Tiertime
1 out of 1 people found this review helpful
Posted 533 days ago
Michael Wegener
Verified Buyer
This is a great piece of hardware. I use it for larger prints mainly in Reflow PETG in our SATWARE//LABS. It performs very well and keeps the temperatures at the same level throughout the print. Stringing does occur in very small amounts so I'm a very happy customer. The direct drive extruder handles large spools (4,5kg) exceptionally well. This kit came with everything needed for my daily needs, even 3 different nozzle sizes were included.
6 out of 6 people found this review helpful
4
Posted 543 days ago
Nigel Owen
Verified Buyer
The printer does a good job and is easy to use but.. shortly after I started to use the printer it stopped communicating via the usb. I contacted Tiertime and received an acknowledgement but no assistance so I started to investigate. First I replaced the main board which I thought was the problem but this made no difference. I then replaced the CPU board but again this made no difference and I was very out of pocket. Having eliminated everything obvious, I investigated the microSD card which the printer uses to store data. I couldn’t read it in a card reader so I replaced it with a blank formatted card. This worked and the printer now connects. As I said, it’s a good printer but support is poor and mine had a very strange fault which cost me a lot of money to identify. I now have some expensive spares!
9 out of 9 people found this review helpful
Posted 330 days ago
Anonymous
Verified Buyer
Very nice
1 out of 1 people found this review helpful
Posted 438 days ago
TAKENOBU M.
Verified Buyer
simple is best! It is worth modifying
5 out of 5 people found this review helpful
Posted 512 days ago
Jose Caceres
Verified Buyer
High Quality parts, an improvement in the manual would be usefull
2 out of 3 people found this review helpful
Posted 523 days ago
emily
Verified Buyer
By far the most accurate and repeatable printer for the price, if you make a lot of parts that require tight tolerances or figurines with ultra high detail, this printer is tuned and perfect. No futzing.
3 out of 3 people found this review helpful
Posted 538 days ago
William M.
Verified Buyer
The MK3 is a well made printer but...I will not use it until I replace the proprietary electronics. If you are using this printer and want to keep your privacy I would do the same. Don't trust China!!!
5 out of 32 people found this review helpful
Posted 547 days ago
Andrew F.
Verified Buyer
Loved the first two - so bought two more. Great support and a well run company!
2 out of 3 people found this review helpful
Posted 316 days ago
Anonymous
Verified Buyer
Very nice
1 out of 1 people found this review helpful
Posted 438 days ago
Nick seger
Verified Buyer
Works pretty well. A little loud, seeing as I keep it next to my bed at night, but not that big of a problem since I'm a heavy sleeper.
1 out of 2 people found this review helpful
Posted 518 days ago
emily
Verified Buyer
By far the most accurate and repeatable printer for the price, if you make a lot of parts that require tight tolerances or figurines with ultra high detail, this printer is tuned and perfect. No futzing.
3 out of 3 people found this review helpful
Posted 538 days ago
Nigel Owen
Verified Buyer
The printer does a good job and is easy to use but.. shortly after I started to use the printer it stopped communicating via the usb. I contacted Tiertime and received an acknowledgement but no assistance so I started to investigate. First I replaced the main board which I thought was the problem but this made no difference. I then replaced the CPU board but again this made no difference and I was very out of pocket. Having eliminated everything obvious, I investigated the microSD card which the printer uses to store data. I couldn’t read it in a card reader so I replaced it with a blank formatted card. This worked and the printer now connects. As I said, it’s a good printer but support is poor and mine had a very strange fault which cost me a lot of money to identify. I now have some expensive spares!
9 out of 9 people found this review helpful
Posted 330 days ago
Cédric Clivaz
Verified Buyer
Assembly manual difficult to understand
2 out of 6 people found this review helpful
Posted 450 days ago
Jose Caceres
Verified Buyer
High Quality parts, an improvement in the manual would be usefull
2 out of 3 people found this review helpful
Posted 523 days ago
Michael Wegener
Verified Buyer
This is a great piece of hardware. I use it for larger prints mainly in Reflow PETG in our SATWARE//LABS. It performs very well and keeps the temperatures at the same level throughout the print. Stringing does occur in very small amounts so I'm a very happy customer. The direct drive extruder handles large spools (4,5kg) exceptionally well. This kit came with everything needed for my daily needs, even 3 different nozzle sizes were included.
6 out of 6 people found this review helpful
4
Posted 543 days ago
EUGENU DRAGOESCU
Verified Buyer
I first saw this printer with a friend. She came to work with me to brag. I also have 3 printer models, of which Prusa, Delta and one SLA type. Although I had printed many models at that time, I was very impressed by the prints made by my friend with a Cetus 3D printer model MKII. This made me buy a standard MKIII printer. I am very satisfied with the quality of the printer. I also decided to buy the update packages for it, namely the digital screen and the heated bed together with the automatic leveling sensor. I warmly recommend the purchase! I will come back with new comments after I upgrade my printer.
7 out of 7 people found this review helpful
Posted 372 days ago
TAKENOBU M.
Verified Buyer
simple is best! It is worth modifying
5 out of 5 people found this review helpful
Posted 512 days ago
Dominick Sansone
Verified Buyer
I am so glad I bought this printer, I bought it because I like like smaller printers, I have some cool ones, but the Cetus MK3 blows my mind, it’s prints better than most of my printers! Thanks Tiertime
1 out of 1 people found this review helpful
Posted 533 days ago
William M.
Verified Buyer
The MK3 is a well made printer but...I will not use it until I replace the proprietary electronics. If you are using this printer and want to keep your privacy I would do the same. Don't trust China!!!
5 out of 32 people found this review helpful
Posted 547 days ago