English

MTR Custom Leather Reviews

4.69 Rating
423 Reviews
All Reviews Products About
MTR Custom Leather voluntarily participates in the program for independent verification of customer reviews. This program gives customers peace of mind when they are shopping online.
Johnnie W Seward , Jr
Verified Buyer
Slim-Line Deluxe Pancake Belt Slide Holster with Thumb Break (B-1B)
Thumb break is really tight and it takes great effort to snap and unsnap it. I'm hoping this is due to a new custom holster and over a short period of time the snap process will loosen up a bit.
Posted 16 days ago
Dwane Snook
Verified Buyer
Deluxe Full-Size Pancake Holster (A-6)
The holster does not fit the gun very well. Hard to draw, can not draw gun on one quick pull--must fight to release the gun. Not what I was hoping for.
Posted 65 days ago
Anonymous
Verified Buyer
Small Clip On or Belt Scabbard Holster (B-5)
THE HOLSTER FITS THE WEAPON FINE. THE LEATHER QUALITY IS DISAPPOINTING. IT IS TOO THIN, TOO STIFF, UNFINISHED ON THE INSIDE. AFTER I RUBBED LEATHER DRESSING ON THE INSIDE, AND WORKED THE LEATHER A LITTLE, THE OUTSIDE HAS ALREADY BEGUN TO CRACK. THIS IS MY THIRD MTR HOLSTER, AND IT JUST NOT COMPARE TO THE PREVIOUS TWO.
Posted 105 days ago
Zeno Davis
Verified Buyer
Alaska Style Hunter's Rig (C-4)
I like thw quality and feel of the hokster. There is a spot where the mag release hits the holster, and dumps the mag everytime. So im going to have to alter the holster.
Posted 113 days ago
Jeffrey S.
Verified Buyer
Paddle Holster with Thumb Break (A-8A)
I don't know what the upgrade for the actual paddle involves, but it only attaches with 2 screws and seems VERY cheap at this connection. The leather fit perfectly, but for $200 I definitely expected this thing to be flawless
Posted 156 days ago
Brad B.
Verified Buyer
Horizontal Shoulder Rig (B-9)
Very high quality! I got the option that works with my Viridian ECR laser/light. Works as expected. I will probably modify the belt loops with snaps so they do not have to stay on my belt when I take it off. Update: As I wear this I notice that the retention strap has a tendency to ride up and uncover the firing pin from the hammer. It has not ridden up over the rear sight yet but can easily be pushed over the sight. If I bend down and my gun slips out I'll be very upset. Besides losing retention, the strap is an additional safety. It's supposed to stay firmly between the hammer and firing pin. I think part of the issue is that the additional space below the trigger guard to allow the Viridian to slide out lets the gun tip down while holstered. This particular laser/light compatible holster needs a better angle on the retention strap. The strap also has a tendency to interfere with the ambidextrous safety. The left side lever is not a problem but the strap partially covers
Posted 162 days ago
Ken P.
Verified Buyer
Dual Purpose Holster (A-2)
Their Dual Carry holster is a winner. I have 4 of them. However, I purchased one of their ankle holsters for a sig P938 that’s a poorly designed piece of junk they still charge a pretty penny for. The 3-star is for their customer service never reaching out to fix the ankle holster issue. Therefore, I highly recommend their Dual Carry but don’t expect any sort of customer service ... buyer beware!
Posted 177 days ago
James Day
Verified Buyer
Avenger Scabbard Holster (A-4)
Love the design. It took an extremely long time to be made and shipped. The fit should be tighter.
Posted 186 days ago
Abe K.
Verified Buyer
Deluxe Thoroughbred Holster (A-1+)
Posted 204 days ago
John PORPORA
Verified Buyer
Paddle Holster with Thumb Break (A-8A)
I was expecting much higher quality for that price
Posted 212 days ago
David W.
Verified Buyer
Paddle Holster (A-8)
Way too slow to produce and ship. The price was extremely expensive, even though the quality seems good. I have purchased many holsters from you, but I am noticing better prices for equal quality in other manufacturers.
Posted 240 days ago
Samuel Shahan
Verified Buyer
Paddle Holster (A-8)
Very nice holster just didn't get the weapon light add-on correct. Ordered Olight PL Pro and recieved PL mini holster. Just decided to buy the light to fit the holster. The lead time is 8-10 weeks so didn't want to wait for the corrected fit.
Posted 267 days ago
Johnnie W Seward , Jr
Verified Buyer
Slim-Line Deluxe Pancake Belt Slide Holster with Thumb Break (B-1B)
Thumb break is really tight and it takes great effort to snap and unsnap it. I'm hoping this is due to a new custom holster and over a short period of time the snap process will loosen up a bit.
Posted 16 days ago
Anonymous
Verified Buyer
Small Clip On or Belt Scabbard Holster (B-5)
THE HOLSTER FITS THE WEAPON FINE. THE LEATHER QUALITY IS DISAPPOINTING. IT IS TOO THIN, TOO STIFF, UNFINISHED ON THE INSIDE. AFTER I RUBBED LEATHER DRESSING ON THE INSIDE, AND WORKED THE LEATHER A LITTLE, THE OUTSIDE HAS ALREADY BEGUN TO CRACK. THIS IS MY THIRD MTR HOLSTER, AND IT JUST NOT COMPARE TO THE PREVIOUS TWO.
Posted 105 days ago
Jeffrey S.
Verified Buyer
Paddle Holster with Thumb Break (A-8A)
I don't know what the upgrade for the actual paddle involves, but it only attaches with 2 screws and seems VERY cheap at this connection. The leather fit perfectly, but for $200 I definitely expected this thing to be flawless
Posted 156 days ago
Ken P.
Verified Buyer
Dual Purpose Holster (A-2)
Their Dual Carry holster is a winner. I have 4 of them. However, I purchased one of their ankle holsters for a sig P938 that’s a poorly designed piece of junk they still charge a pretty penny for. The 3-star is for their customer service never reaching out to fix the ankle holster issue. Therefore, I highly recommend their Dual Carry but don’t expect any sort of customer service ... buyer beware!
Posted 177 days ago
Abe K.
Verified Buyer
Deluxe Thoroughbred Holster (A-1+)
Posted 204 days ago
David W.
Verified Buyer
Paddle Holster (A-8)
Way too slow to produce and ship. The price was extremely expensive, even though the quality seems good. I have purchased many holsters from you, but I am noticing better prices for equal quality in other manufacturers.
Posted 240 days ago
Dwane Snook
Verified Buyer
Deluxe Full-Size Pancake Holster (A-6)
The holster does not fit the gun very well. Hard to draw, can not draw gun on one quick pull--must fight to release the gun. Not what I was hoping for.
Posted 65 days ago
Zeno Davis
Verified Buyer
Alaska Style Hunter's Rig (C-4)
I like thw quality and feel of the hokster. There is a spot where the mag release hits the holster, and dumps the mag everytime. So im going to have to alter the holster.
Posted 113 days ago
Brad B.
Verified Buyer
Horizontal Shoulder Rig (B-9)
Very high quality! I got the option that works with my Viridian ECR laser/light. Works as expected. I will probably modify the belt loops with snaps so they do not have to stay on my belt when I take it off. Update: As I wear this I notice that the retention strap has a tendency to ride up and uncover the firing pin from the hammer. It has not ridden up over the rear sight yet but can easily be pushed over the sight. If I bend down and my gun slips out I'll be very upset. Besides losing retention, the strap is an additional safety. It's supposed to stay firmly between the hammer and firing pin. I think part of the issue is that the additional space below the trigger guard to allow the Viridian to slide out lets the gun tip down while holstered. This particular laser/light compatible holster needs a better angle on the retention strap. The strap also has a tendency to interfere with the ambidextrous safety. The left side lever is not a problem but the strap partially covers
Posted 162 days ago
James Day
Verified Buyer
Avenger Scabbard Holster (A-4)
Love the design. It took an extremely long time to be made and shipped. The fit should be tighter.
Posted 186 days ago
John PORPORA
Verified Buyer
Paddle Holster with Thumb Break (A-8A)
I was expecting much higher quality for that price
Posted 212 days ago
Samuel Shahan
Verified Buyer
Paddle Holster (A-8)
Very nice holster just didn't get the weapon light add-on correct. Ordered Olight PL Pro and recieved PL mini holster. Just decided to buy the light to fit the holster. The lead time is 8-10 weeks so didn't want to wait for the corrected fit.
Posted 267 days ago
Johnnie W Seward , Jr
Verified Buyer
Slim-Line Deluxe Pancake Belt Slide Holster with Thumb Break (B-1B)
Thumb break is really tight and it takes great effort to snap and unsnap it. I'm hoping this is due to a new custom holster and over a short period of time the snap process will loosen up a bit.
Posted 16 days ago
Zeno Davis
Verified Buyer
Alaska Style Hunter's Rig (C-4)
I like thw quality and feel of the hokster. There is a spot where the mag release hits the holster, and dumps the mag everytime. So im going to have to alter the holster.
Posted 113 days ago
Ken P.
Verified Buyer
Dual Purpose Holster (A-2)
Their Dual Carry holster is a winner. I have 4 of them. However, I purchased one of their ankle holsters for a sig P938 that’s a poorly designed piece of junk they still charge a pretty penny for. The 3-star is for their customer service never reaching out to fix the ankle holster issue. Therefore, I highly recommend their Dual Carry but don’t expect any sort of customer service ... buyer beware!
Posted 177 days ago
John PORPORA
Verified Buyer
Paddle Holster with Thumb Break (A-8A)
I was expecting much higher quality for that price
Posted 212 days ago
Dwane Snook
Verified Buyer
Deluxe Full-Size Pancake Holster (A-6)
The holster does not fit the gun very well. Hard to draw, can not draw gun on one quick pull--must fight to release the gun. Not what I was hoping for.
Posted 65 days ago
Jeffrey S.
Verified Buyer
Paddle Holster with Thumb Break (A-8A)
I don't know what the upgrade for the actual paddle involves, but it only attaches with 2 screws and seems VERY cheap at this connection. The leather fit perfectly, but for $200 I definitely expected this thing to be flawless
Posted 156 days ago
James Day
Verified Buyer
Avenger Scabbard Holster (A-4)
Love the design. It took an extremely long time to be made and shipped. The fit should be tighter.
Posted 186 days ago
David W.
Verified Buyer
Paddle Holster (A-8)
Way too slow to produce and ship. The price was extremely expensive, even though the quality seems good. I have purchased many holsters from you, but I am noticing better prices for equal quality in other manufacturers.
Posted 240 days ago
Anonymous
Verified Buyer
Small Clip On or Belt Scabbard Holster (B-5)
THE HOLSTER FITS THE WEAPON FINE. THE LEATHER QUALITY IS DISAPPOINTING. IT IS TOO THIN, TOO STIFF, UNFINISHED ON THE INSIDE. AFTER I RUBBED LEATHER DRESSING ON THE INSIDE, AND WORKED THE LEATHER A LITTLE, THE OUTSIDE HAS ALREADY BEGUN TO CRACK. THIS IS MY THIRD MTR HOLSTER, AND IT JUST NOT COMPARE TO THE PREVIOUS TWO.
Posted 105 days ago
Brad B.
Verified Buyer
Horizontal Shoulder Rig (B-9)
Very high quality! I got the option that works with my Viridian ECR laser/light. Works as expected. I will probably modify the belt loops with snaps so they do not have to stay on my belt when I take it off. Update: As I wear this I notice that the retention strap has a tendency to ride up and uncover the firing pin from the hammer. It has not ridden up over the rear sight yet but can easily be pushed over the sight. If I bend down and my gun slips out I'll be very upset. Besides losing retention, the strap is an additional safety. It's supposed to stay firmly between the hammer and firing pin. I think part of the issue is that the additional space below the trigger guard to allow the Viridian to slide out lets the gun tip down while holstered. This particular laser/light compatible holster needs a better angle on the retention strap. The strap also has a tendency to interfere with the ambidextrous safety. The left side lever is not a problem but the strap partially covers
Posted 162 days ago
Abe K.
Verified Buyer
Deluxe Thoroughbred Holster (A-1+)
Posted 204 days ago
Samuel Shahan
Verified Buyer
Paddle Holster (A-8)
Very nice holster just didn't get the weapon light add-on correct. Ordered Olight PL Pro and recieved PL mini holster. Just decided to buy the light to fit the holster. The lead time is 8-10 weeks so didn't want to wait for the corrected fit.
Posted 267 days ago