English
Welding Accessories

25 HTS-735 II Fluxless Brazing Rods Reviews

4.23 Rating (13 Reviews)
HTS-735 II Fluxless Brazing Rods
59.95 USD Buy at Aluminum-Weld
Fred Liebau
Verified Buyer
It just did not work. I tried until the heat split the metal. I was trying to repair a hole in my Air Stream. Aluminum skin Motor Home. Do we get a refund?
Posted 18 days ago
C James
Verified Buyer
Posted 46 days ago
Mark A S.
Verified Buyer
Works great, but do not apply the rod to the aluminum under the flame, and make sure the aluminum is very clean. I found there are installations that still require a tig or mig welder, but for small repairs this brazing rod does well.
Posted 65 days ago
Steve Stewart
Verified Buyer
Can’t seem to get the aluminum hot enough with propane to get the material to flow. Working on 18.5ft G3 aluminum boat haul. So I can’t really rate it yet Steve
Posted 67 days ago
Richard Humphreys
Verified Buyer
I used the product to repair the stern of my square back canoe. Worked as advertised with a strong permanent repair. I tried to use it on some leaking rivets, but I had repaired them several years ago with West Systems Aluminum Boat Repair epoxy. When I heated up the rivets the epoxy caught fire, so I decided to seal them again with epoxy. Had I not used the epoxy previously I believe the aluminum brazing rods would have been a better, more permanent repair. There were problems with the post office losing my original order. When I called to check on it I received courteous and prompt help with a second shipment via priority mail. Tremendous customer service. Highly recommended!
Posted 73 days ago
Anonymous
Verified Buyer
So far I'm very pleased, started brazing holes in my aluminum boat have more holes to do but the rods have worked very well and seems to have a very strong bond. Very surprised how easy it is to do.
Posted 92 days ago
Kevin B.
Verified Buyer
I welded up a cracked rim, mounted a tire on it holds air!
Posted 164 days ago
Scott
Verified Buyer
Have not received anything yet
Posted 221 days ago
Robert C.
Verified Buyer
Posted 279 days ago
Pablo Reyna
Verified Buyer
Good product
Posted 360 days ago
Anonymous
Verified Buyer
Great product and fast shipping
Posted 376 days ago
Peter Davis
Verified Buyer
We could not fix the gash in our pontoon. I like the product but couldn't get the pontoon itself hot enough for the solder to take.
Posted 397 days ago
Fred Liebau
Verified Buyer
It just did not work. I tried until the heat split the metal. I was trying to repair a hole in my Air Stream. Aluminum skin Motor Home. Do we get a refund?
Posted 18 days ago
Mark A S.
Verified Buyer
Works great, but do not apply the rod to the aluminum under the flame, and make sure the aluminum is very clean. I found there are installations that still require a tig or mig welder, but for small repairs this brazing rod does well.
Posted 65 days ago
Richard Humphreys
Verified Buyer
I used the product to repair the stern of my square back canoe. Worked as advertised with a strong permanent repair. I tried to use it on some leaking rivets, but I had repaired them several years ago with West Systems Aluminum Boat Repair epoxy. When I heated up the rivets the epoxy caught fire, so I decided to seal them again with epoxy. Had I not used the epoxy previously I believe the aluminum brazing rods would have been a better, more permanent repair. There were problems with the post office losing my original order. When I called to check on it I received courteous and prompt help with a second shipment via priority mail. Tremendous customer service. Highly recommended!
Posted 73 days ago
Kevin B.
Verified Buyer
I welded up a cracked rim, mounted a tire on it holds air!
Posted 164 days ago
Robert C.
Verified Buyer
Posted 279 days ago
Anonymous
Verified Buyer
Great product and fast shipping
Posted 376 days ago
C James
Verified Buyer
Posted 46 days ago
Steve Stewart
Verified Buyer
Can’t seem to get the aluminum hot enough with propane to get the material to flow. Working on 18.5ft G3 aluminum boat haul. So I can’t really rate it yet Steve
Posted 67 days ago
Anonymous
Verified Buyer
So far I'm very pleased, started brazing holes in my aluminum boat have more holes to do but the rods have worked very well and seems to have a very strong bond. Very surprised how easy it is to do.
Posted 92 days ago
Scott
Verified Buyer
Have not received anything yet
Posted 221 days ago
Pablo Reyna
Verified Buyer
Good product
Posted 360 days ago
Peter Davis
Verified Buyer
We could not fix the gash in our pontoon. I like the product but couldn't get the pontoon itself hot enough for the solder to take.
Posted 397 days ago
Fred Liebau
Verified Buyer
It just did not work. I tried until the heat split the metal. I was trying to repair a hole in my Air Stream. Aluminum skin Motor Home. Do we get a refund?
Posted 18 days ago
Steve Stewart
Verified Buyer
Can’t seem to get the aluminum hot enough with propane to get the material to flow. Working on 18.5ft G3 aluminum boat haul. So I can’t really rate it yet Steve
Posted 67 days ago
Kevin B.
Verified Buyer
I welded up a cracked rim, mounted a tire on it holds air!
Posted 164 days ago
Pablo Reyna
Verified Buyer
Good product
Posted 360 days ago
C James
Verified Buyer
Posted 46 days ago
Richard Humphreys
Verified Buyer
I used the product to repair the stern of my square back canoe. Worked as advertised with a strong permanent repair. I tried to use it on some leaking rivets, but I had repaired them several years ago with West Systems Aluminum Boat Repair epoxy. When I heated up the rivets the epoxy caught fire, so I decided to seal them again with epoxy. Had I not used the epoxy previously I believe the aluminum brazing rods would have been a better, more permanent repair. There were problems with the post office losing my original order. When I called to check on it I received courteous and prompt help with a second shipment via priority mail. Tremendous customer service. Highly recommended!
Posted 73 days ago
Scott
Verified Buyer
Have not received anything yet
Posted 221 days ago
Anonymous
Verified Buyer
Great product and fast shipping
Posted 376 days ago
Mark A S.
Verified Buyer
Works great, but do not apply the rod to the aluminum under the flame, and make sure the aluminum is very clean. I found there are installations that still require a tig or mig welder, but for small repairs this brazing rod does well.
Posted 65 days ago
Anonymous
Verified Buyer
So far I'm very pleased, started brazing holes in my aluminum boat have more holes to do but the rods have worked very well and seems to have a very strong bond. Very surprised how easy it is to do.
Posted 92 days ago
Robert C.
Verified Buyer
Posted 279 days ago
Peter Davis
Verified Buyer
We could not fix the gash in our pontoon. I like the product but couldn't get the pontoon itself hot enough for the solder to take.
Posted 397 days ago