English
Welding Accessories

8 HTS-735 II Fluxless Brazing Rods Reviews

3.92 Rating (48 Reviews)
HTS-735 II Fluxless Brazing Rods
24.99 USD Buy at Aluminum-Weld
Steven Meyer
Verified Buyer
Excellent product. Worked as prescribed and extremely easy and clean finish.
Posted 19 days ago
Max
Verified Buyer
Used it to seal up small holes on my Jon boat. Very easy to use and works great.
Posted 25 days ago
Forrest Knowles
Verified Buyer
Could not get the rods to melt correctly. Followed the instructions to the letter but it still did not bond as advertised. Wanted to repair areas on aluminum boat but this was not the answer. Used propane (blue) changed to hotter gas (yellow) and still the bond was not there. Cleaned, wire brushed, and roughed area with a grinder but no real bond ever formed. Highly disappointed based off the videos and reviews. I would not use or recommend this product.
Posted 73 days ago
Don
Verified Buyer
I bought the product primarily to repair the bottom of an aluminum boat and it performed exactly as promised. No complaints! But before doing that, however, as a test, I tried joining two 1/8 inch plates together perpendicularly (following the printed instructions) and was disappointed when they broke apart will very little effort. I called the 800 number, explained what I'd done (and how) and got some tips on how to improve the "weld". I followed the advice and got a far superior result, so technique has a lot to do with it. The fact that the product works and that they are there to help has me sold on the product and the company.
Posted 74 days ago
Anonymous
Verified Buyer
aluminum melted before rod did now i have a bigger hole in my boat !
Posted 96 days ago
Richard K.
Verified Buyer
Posted 104 days ago
Dustin
Verified Buyer
Did not bond to bare aluminum very well in my experience wanted to bead and collect on surface instead of bonding to surface. Only way i was able to get it to fill the 1/8” hole was getting material bead on surface and taking a steel piece of metal to push it flat against the aluminum
Posted 111 days ago
Tim
Verified Buyer
Work very well
Posted 113 days ago
Robert
Verified Buyer
Worked great fixed crack in boat just take your time and remember low heat
Posted 118 days ago
Sean McCarthy
Verified Buyer
Great company snd great product
Posted 128 days ago
Joseph Glover
Verified Buyer
3 rods are broken
Posted 130 days ago
Michael G.
Verified Buyer
Posted 141 days ago
Steven Meyer
Verified Buyer
Excellent product. Worked as prescribed and extremely easy and clean finish.
Posted 19 days ago
Forrest Knowles
Verified Buyer
Could not get the rods to melt correctly. Followed the instructions to the letter but it still did not bond as advertised. Wanted to repair areas on aluminum boat but this was not the answer. Used propane (blue) changed to hotter gas (yellow) and still the bond was not there. Cleaned, wire brushed, and roughed area with a grinder but no real bond ever formed. Highly disappointed based off the videos and reviews. I would not use or recommend this product.
Posted 73 days ago
Anonymous
Verified Buyer
aluminum melted before rod did now i have a bigger hole in my boat !
Posted 96 days ago
Dustin
Verified Buyer
Did not bond to bare aluminum very well in my experience wanted to bead and collect on surface instead of bonding to surface. Only way i was able to get it to fill the 1/8” hole was getting material bead on surface and taking a steel piece of metal to push it flat against the aluminum
Posted 111 days ago
Robert
Verified Buyer
Worked great fixed crack in boat just take your time and remember low heat
Posted 118 days ago
Joseph Glover
Verified Buyer
3 rods are broken
Posted 130 days ago
Max
Verified Buyer
Used it to seal up small holes on my Jon boat. Very easy to use and works great.
Posted 25 days ago
Don
Verified Buyer
I bought the product primarily to repair the bottom of an aluminum boat and it performed exactly as promised. No complaints! But before doing that, however, as a test, I tried joining two 1/8 inch plates together perpendicularly (following the printed instructions) and was disappointed when they broke apart will very little effort. I called the 800 number, explained what I'd done (and how) and got some tips on how to improve the "weld". I followed the advice and got a far superior result, so technique has a lot to do with it. The fact that the product works and that they are there to help has me sold on the product and the company.
Posted 74 days ago
Richard K.
Verified Buyer
Posted 104 days ago
Tim
Verified Buyer
Work very well
Posted 113 days ago
Sean McCarthy
Verified Buyer
Great company snd great product
Posted 128 days ago
Michael G.
Verified Buyer
Posted 141 days ago
Steven Meyer
Verified Buyer
Excellent product. Worked as prescribed and extremely easy and clean finish.
Posted 19 days ago
Don
Verified Buyer
I bought the product primarily to repair the bottom of an aluminum boat and it performed exactly as promised. No complaints! But before doing that, however, as a test, I tried joining two 1/8 inch plates together perpendicularly (following the printed instructions) and was disappointed when they broke apart will very little effort. I called the 800 number, explained what I'd done (and how) and got some tips on how to improve the "weld". I followed the advice and got a far superior result, so technique has a lot to do with it. The fact that the product works and that they are there to help has me sold on the product and the company.
Posted 74 days ago
Dustin
Verified Buyer
Did not bond to bare aluminum very well in my experience wanted to bead and collect on surface instead of bonding to surface. Only way i was able to get it to fill the 1/8” hole was getting material bead on surface and taking a steel piece of metal to push it flat against the aluminum
Posted 111 days ago
Sean McCarthy
Verified Buyer
Great company snd great product
Posted 128 days ago
Max
Verified Buyer
Used it to seal up small holes on my Jon boat. Very easy to use and works great.
Posted 25 days ago
Anonymous
Verified Buyer
aluminum melted before rod did now i have a bigger hole in my boat !
Posted 96 days ago
Tim
Verified Buyer
Work very well
Posted 113 days ago
Joseph Glover
Verified Buyer
3 rods are broken
Posted 130 days ago
Forrest Knowles
Verified Buyer
Could not get the rods to melt correctly. Followed the instructions to the letter but it still did not bond as advertised. Wanted to repair areas on aluminum boat but this was not the answer. Used propane (blue) changed to hotter gas (yellow) and still the bond was not there. Cleaned, wire brushed, and roughed area with a grinder but no real bond ever formed. Highly disappointed based off the videos and reviews. I would not use or recommend this product.
Posted 73 days ago
Richard K.
Verified Buyer
Posted 104 days ago
Robert
Verified Buyer
Worked great fixed crack in boat just take your time and remember low heat
Posted 118 days ago
Michael G.
Verified Buyer
Posted 141 days ago